LVP Flooring Installation in Orange County

Luxury Vinyl Plank Flooring, Installed Properly

Most problems with luxury vinyl plank are not the plank. They are the floor underneath it. Vinyl is thin and it telegraphs whatever it is laid over, so a subfloor out by a quarter inch across a room shows up later as flex underfoot and seams that separate. Onyx GC installs LVP across Orange County, and the preparation gets as much attention as the flooring itself.

Because we also handle baseboards, trim and paint, the floor is not the end of the job with somebody else called in to finish the edges. Transitions between rooms, baseboard removal and reinstallation, and the touch-up where wall meets new floor all happen with the same crew on the same visit.

What a Flooring Job Involves

• Removing and disposing of existing flooring
• Subfloor inspection, preparation and levelling
• Luxury vinyl plank installation, glue-down or click-lock
• Transitions and thresholds between rooms and surfaces
• Stair treads and risers where they are in scope
• Baseboard removal and reinstallation, or new baseboard
• Paint touch-up where the wall meets the new floor

How much does LVP flooring installation cost in Orange County?

Standard luxury vinyl plank installation runs $4 to $6 per square foot for labor. On a 500 square foot room that works out to roughly $2,000 to $3,000 in labor. Several things are quoted separately because they vary so much from house to house: the flooring material itself, demolition and disposal of what is down now, subfloor preparation and levelling, stairs, transitions between rooms, and baseboards. What moves the number is how flat the existing subfloor actually is, whether the old flooring has to come up first, the shape of the room and how many cuts it forces, and whether stairs are included. We walk the space and tell you which of those apply before the job starts rather than presenting them as surprises afterwards, because on flooring the extras are usually where a quote goes wrong. The labor figure covers the install itself; materials, demolition, levelling, stairs and transitions are quoted alongside it so you can see what each costs. Estimates are free and the work is covered for two years. Our minimum charge is $300 to $500, so a single small room is often best grouped with other work.

How does Onyx GC do the work?

We start by clearing and protecting the space — furniture out, and anything staying covered. Existing flooring comes up and goes out, and then the subfloor gets the attention that decides how the finished floor feels: checked for flatness, high spots ground down, low spots filled and levelled, and any soft or damaged decking dealt with before a plank goes down. Vinyl is thin and telegraphs whatever is under it, so this is where the job is won or lost. Planks are laid with the correct expansion gap at the perimeter, cuts kept tight at doorways and transitions, and thresholds fitted between rooms. Baseboards go back on or get replaced, and we touch up the paint where wall meets floor. At the end of each workday we clean and organize the area, and at completion we walk the job with you.

A floor is the largest single surface in a room, and a bad subfloor will show through whatever goes on top of it. As a licensed general contractor (CSLB #1122521) with 49 five-star Google reviews, Onyx GC does the prep properly and finishes the edges in the same visit. Need flooring installed in Orange County? Call (949) 320-3095 for a free estimate.

Room Prep Before Flooring

Real rooms, not catalogue shots. Most show the floor cleared and the subfloor exposed, which is the stage that decides how the finished floor feels.